New Articles

  1. Multi-Tip - User Manual

    Created On: 22/06/2018 in Multi-Tip
    The Multi-Tip User Manual contains instructions on the safe operation and maintenance of the Simpro Multi-Tip bin lifter, and can be viewed or downloaded here. Hardcopy replacements are available from Simpro.

  2. Ezi-MT - User Manual

    Created On: 21/06/2018 in Ezi-MT
    The Ezi-MT User Manual contains instructions on safe operation and maintenance of the Simpro Ezi-MT bin lifter, and can be viewed or downloaded here. Hard-copy replacements are available on request from Simpro.

  3. How to test if the lifting chains have worn on a Simpro lifting machine

    Created On: 18/06/2018 in Common
    Simpro manufactures a wide range of lifting machines and most commonly we use 08B grade lifting chain.  The chain can stretch or wear over time and to test whether the wear is within acceptable tolerances, we have designed the C...

  4. Quikstak “smart-stacker” - Identifying the source of an oil leak

    Created On: 09/01/2018 in Quikstak “smart-stacker” Quikstak “smart-stacker” - Support Articles
    How to identify the source of a hydraulic oil leak on a Quikstak "smart-stacker" from Simpro.

  5. MegaDumper - Adjusting the lifting chains

    Created On: 01/12/2017 in MegaDumper MegaDumper - Support Articles
    How to correctly adjust the lifting chains on a Simpro MegaDumper bin lifter.

  6. Introduction to Simpro compressed air power - Common

    Created On: 27/11/2017 in Common
    General description of the compressed air powerpack available for Simpro machines, along with performance characteristics and maintenance requirements.

  7. Dumpmaster - Repairing the hydraulic ram hose-burst valve

    Created On: 05/10/2017 in Dumpmaster Dumpmaster - Support Articles
    How to reset or remove the hydraulic ram hose-burst valve on the Simpro Dumpmaster bin lifter.

  8. Remove and replace a contact block - Common

    Created On: 05/09/2017 in Common
    A short video showing how to remove and replace the ZBE101 contact block from control switches used on Simpro machines.

  9. Eurover - Spare Parts

    Created On: 30/08/2017 in Eurover
    Use this table to find the spare part(s) you require for the Simpro Eurover bin lifter, then contact Simpro with the part number and it will be dispatched to you as soon as possible.

  10. Eurover - Checking the drive belts

    Created On: 29/08/2017 in Eurover Eurover - Support Articles
    How to check that the drive belts are properly installed and tightened on the Simpro Eurover bin lifter.