How to retrofit a strobe lamp or safety buzzer to a Simpro Multi-Tip bin lifter.
Procedure
-
- Simpro standard colours
- Remove and replace a contact block
- Catches for 360-litre wheelie bins
- How to measure the hydraulic ram stroke length
- Introduction to Simpro compressed air power
- How to test if the lifting chains have worn on a Simpro lifting machine
- How to identify and repair an oil leak in the powerpack
-
- User Manual
- Assembly Guide
- User Training Questionnaire
- Spare Parts
- Schedule of Design Changes
-
- Electrical system care and maintenance
- Hydraulic powerpack care and maintenance
- Hydraulic ram care and maintenance
- Changing the tipping height on an adjustable model
- Replacing the Motor Relay
- Replacing the lowering valve solenoid
- Replacing the control switches
- Replacing the cradle carrier
- Retrofitting a solar panel
- Replacing the electric motor
- Retrofitting a strobe lamp
- Replacing the oil tank on an ‘Oil Sistem’ powerpack
- Clearing a blocked ram port
- Attaching BRUTE® bin catches to an EN840 cradle
- Retrofitting an operator guard
- Adjusting the lowering speed
-
- User Manual
- Assembly Guide
- User Training Questionnaire
- Spare Parts
- Schedule of Design Changes
-
- Repairing the hydraulic ram hose-burst valve
- About the LED battery indicator
- Replacing the batteries
- Testing the battery condition
- Adjusting the pressure relief valve
- Troubleshooting a non-operational motor on a mains-powered machine
- Part numbers of polycarbon guard panels
- Retrofitting an IDEC door interlock system
- Refitting the lifting chains into the wear strip grooves
- Altering the length of the lifting chains
- Changing the tipping height on an adjustable model
- Retrofitting a bin hook kit
- Replacing the bin cradle
- Retrofitting an Operator Guard
Multi-Tip - Retrofitting a strobe lamp
Modified on 10/08/2018 5:05 pm NZST