breather plug
A permeable plug which is normally fitted to the hydraulic oil tank and allows air to pass in and out, preventing a vacuum from forming inside the tank
EN840
EN840 is the European standard for the design and manufacture of mobile waste containers. EN840-compliant bins are often called wheelie bins, and are used all around the world for garbage collection and recycling.
IP00
Not protected from solids, and not protected from liquids.
IP01
Not protected from solids, and protected from condensation.
IP02
Not protected from solids, and protected from water spray less than 15 degrees from vertical.
IP03
Not protected from solids, and protected from water spray less than 60 degrees from vertical.
IP04
Not protected from solids, and protected from water spray from any direction.
IP05
Not protected from solids, and protected from low pressure water jets from any direction.
IP06
Not protected from solids, and protected from high pressure water jets from any direction.
IP07
Not protected from solids, and protected from immersion between 15 centimeters and 1 meter in depth.
IP08
Not protected from solids, and protected from long term immersion up to a specified pressure.
IP10
Protected from touch by hands greater than 50 millimeters, and not protected from liquids.
IP11
Protected from touch by hands greater than 50 millimeters, and protected from condensation.
IP12
Protected from touch by hands greater than 50 millimeters, and protected from water spray less than 15 degrees from vertical.
IP13
Protected from touch by hands greater than 50 millimeters, and protected from water spray less than 60 degrees from vertical.
IP14
Protected from touch by hands greater than 50 millimeters, and protected from water spray from any direction.
IP15
Protected from touch by hands greater than 50 millimeters, and protected from low pressure water jets from any direction.
IP16
Protected from touch by hands greater than 50 millimeters, and protected from high pressure water jets from any direction.
IP17
Protected from touch by hands greater than 50 millimeters, and protected from immersion between 15 centimeters and 1 meter in depth.
IP18
Protected from touch by hands greater than 50 millimeters, and protected from long term immersion up to a specified pressure.
IP20
Protected from touch by fingers and objects greater than 12 millimeters, and not protected from liquids.
IP21
Protected from touch by fingers and objects greater than 12 millimeters, and protected from condensation.
IP22
Protected from touch by fingers and objects greater than 12 millimeters, and protected from water spray less than 15 degrees from vertical.
IP23
Protected from touch by fingers and objects greater than 12 millimeters, and protected from water spray less than 60 degrees from vertical.
IP24
Protected from touch by fingers and objects greater than 12 millimeters, and protected from water spray from any direction.
IP25
Protected from touch by fingers and objects greater than 12 millimeters, and protected from low pressure water jets from any direction.
IP26
Protected from touch by fingers and objects greater than 12 millimeters, and protected from high pressure water jets from any direction.
IP27
Protected from touch by fingers and objects greater than 12 millimeters, and protected from immersion between 15 centimeters and 1 meter in depth.
IP28
Protected from touch by fingers and objects greater than 12 millimeters, and protected from long term immersion up to a specified pressure.
IP30
Protected from tools and wires greater than 2, and 5 millimeters, and not protected from liquids.
IP31
Protected from tools and wires greater than 2, and 5 millimeters, and protected from condensation.
IP32
Protected from tools and wires greater than 2, and 5 millimeters, and protected from water spray less than 15 degrees from vertical.
IP33
Protected from tools and wires greater than 2, and 5 millimeters, and protected from water spray less than 60 degrees from vertical.
IP34
Protected from tools and wires greater than 2, and 5 millimeters, and protected from water spray from any direction.
IP35
Protected from tools and wires greater than 2, and 5 millimeters, and protected from low pressure water jets from any direction.
IP36
Protected from tools and wires greater than 2, and 5 millimeters, and protected from high pressure water jets from any direction.
IP37
Protected from tools and wires greater than 2, and 5 millimeters, and protected from immersion between 15 centimeters and 1 meter in depth.
IP38
Protected from tools and wires greater than 2, and 5 millimeters, and protected from long term immersion up to a specified pressure.
IP40
Protected from tools and small wires greater than 1 millimeter, and not protected from liquids.
IP41
Protected from tools and small wires greater than 1 millimeter, and protected from condensation.
IP42
Protected from tools and small wires greater than 1 millimeter, and protected from water spray less than 15 degrees from vertical.
IP43
Protected from tools and small wires greater than 1 millimeter, and protected from water spray less than 60 degrees from vertical.
IP44
Protected from tools and small wires greater than 1 millimeter, and protected from water spray from any direction.
IP45
Protected from tools and small wires greater than 1 millimeter, and protected from low pressure water jets from any direction.
IP46
Protected from tools and small wires greater than 1 millimeter, and protected from high pressure water jets from any direction.
IP47
Protected from tools and small wires greater than 1 millimeter, and protected from immersion between 15 centimeters and 1 meter in depth.
IP48
Protected from tools and small wires greater than 1 millimeter, and protected from long term immersion up to a specified pressure.
IP50
Protected from limited dust ingress, and not protected from liquids.
IP51
Protected from limited dust ingress, and protected from condensation.
IP52
Protected from limited dust ingress, and protected from water spray less than 15 degrees from vertical.
IP53
Protected from limited dust ingress, and protected from water spray less than 60 degrees from vertical.
IP54
Protected from limited dust ingress, and protected from water spray from any direction.
IP55
Protected from limited dust ingress, and protected from low pressure water jets from any direction.
IP56
Protected from limited dust ingress, and protected from high pressure water jets from any direction.
IP57
Protected from limited dust ingress, and protected from immersion between 15 centimeters and 1 meter in depth.
IP58
Protected from limited dust ingress, and protected from long term immersion up to a specified pressure.
IP60
Protected from total dust ingress, and not protected from liquids.
IP61
Protected from total dust ingress, and protected from condensation.
IP62
Protected from total dust ingress, and protected from water spray less than 15 degrees from vertical.
IP63
Protected from total dust ingress, and protected from water spray less than 60 degrees from vertical.
IP64
Protected from total dust ingress, and protected from water spray from any direction.
IP65
Protected from total dust ingress, and protected from low pressure water jets from any direction.
IP66
Protected from total dust ingress, and protected from high pressure water jets from any direction.
IP67
Protected from total dust ingress, and protected from immersion between 15 centimeters and 1 meter in depth.
IP68
Protected from total dust ingress, and protected from long term immersion up to a specified pressure.
IP69K
Protected from total dust ingress, and protected from steam-jet cleaning.
Model Number
The Model Number is an alphanumeric code which describes the basic type and specifications of a Simpro machine. It can normally be found on the machine rating plate, or on a small meta tag affixed to the frame.
Serial Number
The Serial Number is an alphanumeric code which uniquely identifies every Simpro machine ever made. It can normally be found on the machine rating plate, or on a small meta tag affixed to the frame.
Tek® screws
Tek® screws are a brand of self-tapping fastener, with small carving at the end of the tip called a drill bit. Other brands of self-tapping fastener are available.
transit plug
A temporary non-permeable plug which is fitted to the hydraulic oil tank while the machine is being shipped, to prevent hydraulic fluid from leaking